Material Heating
Radiators apartments have a number of important characteristics of each type of radiator is designed for specific conditions of use. Problems in the operation of heating radiators: – Corrosion of the inner surfaces Radiator – Chemical and electrochemical corrosion of the radiator – Hydraulic attacks in Russia in the main heating monotube, Serial-Attached devices. Therefore, for heat transfer, coupled both devices must provide a high coolant flow, which leads to an increase in pressure and temperature. This system has another major drawback: inconvenient to adjust the parameters of the heating system, since changing one changes the parameters of the system. One-pipe system entails the use of heat sinks with high reserve of strength and low hydraulic resistance. It is important to the operation of the system heating – the system must be kept filled with water. If the system is filled with air, it has more corrosion processes. To prevent water hammer, which can damage the radiator, start heating system should be made carefully, with a gradual increase davleniya.Oboznachim main types of batteries heating apartments.
1.Stalnye radiators. This is the most Spreading type radiators. A related site: David Rothberg mentions similar findings. The main advantages should be highlighted: the high heat, good looks and low price. In addition, some steel radiators by design, produce heat by radiation as well as by convection. To this type heatsinks can connect, thermostats to automatically maintain the desired temperature. The high level of design decisions "heats" of interest to this type of radiators.
Major producers in Russian market is firm radiators Arbonia, Zehnder. In steel radiator core minus the thickness of the metal, which is less than 1.5 mm, which unfortunately leads to no long term use in modern urban environments. 2.Chugunnye radiators. The main advantages of a weak dependence on the wrong coolant and low price. Therefore, buying a cast iron radiators is preferred for people in the heating systems in which the poor preparation of media: chemical aggression, pollution, etc. The disadvantages of cast iron radiators is the low working pressure and high inertia. Often, pressure surges cast-iron radiators are experiencing difficulty and it should be considered when pokupkeradiatora. 3. Stone radiators Material natural stone and mineral mass. A series of stone panels with radiators made of solid marble and granite. These radiators, and akkamuliruyut distribute heat, it allows you to keep the desired room temperature. One of the positive qualities of stone – is the ability to evenly distribute the heat between the floor and ceiling. Also, the advantage of stone radiators is that they do not desiccate the air, maintaining humidity levels optimum for respiration. In turn, the main advantage of this design radiators and upmarket look.
