You are currently browsing posts tagged with ingenuity

Cleaning Diesel Particulate Filter

§ March 23rd, 2024 § Filed under General § Tagged , , , , Comments Off on Cleaning Diesel Particulate Filter

The r & d Department has developed as a novelty worldwide, a revolutionary product for repairing the system antipollution DPF (Diesel particulate filter). Due to European regulations limiting emissions of polluting gases, automakers are forced to design and manufacture new filtering systems such as the DPF. You may wish to learn more. If so, Ford Motors is the place to go. Here is a real alternative to the replacement of the filter. Due to European regulations limiting emissions of polluting gases, automakers are forced to design and manufacture new filtering systems such as the DPF. Currently the majority of diesel engines and all future should mount, as well as the catalyst, an additional filter located posterior to this, which has the Mission of filtrating particles of soot. Thus, pollution levels are significantly reduced. Due to the nature of the system and for this to filter larger particles, it is necessary to manufacture it with a panel highly restrictive, although the system is very effective, but at the same time it is easy that is clogged. Indeed manufacturer is already knowledgeable of this program the vehicle so using pressure sensors, it knows when is blocking and prepares a regeneration.

DPF equipped vehicle to have the ability to regenerate, need a minimum parameters which, varying values according to the brands, are:.A given load.Minimum engine rpm.A pressure difference between inlet and outlet of filter.A minimum temperature in the appliance. All these parameters must be give in addition for a time determined by the brand. When these parameters meet the car regenerates and returns the filter to a State of normal shutter. The problem lies in that when these parameters are not met, the vehicle does not regenerate and will exponentially, by dabbing until you reach a level where regeneration is not possible for safety reasons. When this type of situation occurs in the most cases has to replace the entire filter. For this costly problem, a product which, applied through the probe before the filter has developed, breaks up larger particles, causing the shutter, so that these already if they can pass through and re-do the regeneration. The application from the 131 TUNAP is made using a gun to specific pressure which brand comes with a tool which is inserted into the filter so that sprayed pressurized.

The set comes a second product which is a neutralizer of alkalinity in the first and in this way we protect the materials after cleaning. The product is water based, so no danger of any kind by putting the vehicle into operation, since it lacks of solvents. He then mounts the probe and should circulate with the vehicle for 15-20 minutes to make the particles pass through the filter and is desobture. With this process, filter that saturation should replace, can be used without any inconvenience. The TUNAP 131 application is made using a gun to specific pressure which brand comes with a tool which is inserted into the filter so sprayed under pressure. The set comes a second product which is a neutralizer of alkalinity in the first and in this way we protect the materials after cleaning. The main brands of automobiles of our country have been positively tested this new product, opening clear expectations in maintenance of vehicles, including the warranty period.